All best sellers

Search on blog

ABS Plastic

ABS Plastic

Active filters

What is ABS Plastic?

ABS plastic, or Acrylonitrile Butadiene Styrene, is a versatile thermoplastic polymer known for its strength, rigidity, and resistance to impact and abrasion. It is widely used in various fields, including scale modeling, crafts, automotive parts, consumer goods, and electronic housings. Its durability and ease of use make it a popular choice among hobbyists and professionals alike.

It offers a unique combination of properties: acrylonitrile provides chemical resistance and surface hardness, butadiene imparts toughness and impact strength, while styrene adds rigidity and ease of processing. This trifecta of properties makes it a go-to for projects that require a robust yet workable modeling material.

Where to Buy ABS Plastic Sheets?

For the best quality ABS plastic sheets and profiles, Green Stuff World is the go-to source. Green Stuff World offers a wide selection of modeling materials and Plasticard, ideal for scale modeling and crafts. To meet your project needs, you can easily find various thicknesses in sheets and profiles.

Green Stuff World Online Store: Green Stuff World provides an extensive range of Plasticard sheets and profiles through their online store. Their products are known for their high quality and suitability for a variety of applications.

  • Resellers of Green Stuff World Products: 
  • Amazon: Often carries Green Stuff World products.
  • eBay and ETSY: Platforms where many sellers offer Green Stuff World products.
  • Local Hobby Shops: Many local hobby shops also stock Green Stuff World products. Check with your nearest hobby store for availability.

How to Glue ABS Plastic?

To be able to glue ABS plastic effectively requires the right adhesive and proper preparation of the surfaces to be bonded. Here’s a step-by-step guide:

  1. Clean the Surfaces: Ensure that the surfaces to be glued are clean and free from dust, grease, or any other contaminants. Use isopropyl alcohol or a similar cleaner to wipe down the surfaces.
  2. Sand the Surfaces: Lightly sand the areas to be bonded with fine-grit sandpaper (around 220 grit) to create a rough surface for better adhesion.
  3. Choose the Right Adhesive:

    • Cyanoacrylate Glue (Super Glue): Suitable for small, quick bonds. Provides a strong, fast-setting bond but may become brittle over time.
    • Plastic Cement (SkullGlue): Solvent-based adhesives specifically designed for plastics. These work by slightly melting the surfaces to create a strong, fused bond.
    • Epoxy: Provides a strong, durable bond and is excellent for large surface areas. However, it requires more time to set and cure.
  4. Apply the Adhesive: Follow the instructions specific to the adhesive you are using. Apply a thin, even layer to one or both surfaces as required.
  5. Clamp and Cure: Press the pieces together firmly and hold or clamp them in place until the adhesive sets. Allow the bond to cure fully before handling the glued pieces.

Is ABS Plastic Safe?

It is generally considered safe for most applications. It is non-toxic and does not contain harmful BPA (Bisphenol A) or phthalates, which are chemicals often found in other types of plastics. However, there are some considerations to keep in mind:

  • Heat Resistance: It can withstand moderate heat but may release fumes if subjected to high temperatures. It’s important to use this material within its recommended temperature range.
  • Fumes from Cutting or Gluing: When cutting, sanding, or gluing this material, it can release small amounts of fumes. Ensure you work in a well-ventilated area and consider wearing a mask to avoid inhaling any particles or fumes.
  • Food Contact: While it is non-toxic, it is not typically approved for direct food contact. If you are making items that will come into contact with food, look for plastics specifically certified for food safety.

How to Cut ABS Plastic?

Cutting this material can be done using various tools, depending on the thickness of the material and the precision required. Here are some methods:

  1. Utility Knife: For thin sheets (up to 1/8 inch or 3mm), a sharp utility knife can be used.
  2. Scoring and Snapping: Score the material along a straight edge using the knife, then bend the sheet until it snaps along the scored line.
  3. Handsaw: For thicker sheets, a fine-toothed hand saw or hacksaw can be used to achieve a clean cut.
  4. Laser Cutter: For intricate designs and professional finishes, a laser cutter can be used. This method requires specialized equipment.
  5. Power Tools:
  • Table Saw: Provides straight, precise cuts and is ideal for thicker sheets.
  • Jigsaw: Useful for cutting curves and complex shapes. Use a fine-toothed blade designed for cutting plastic.
  • Rotary Tool (Dremel): Excellent for detailed cuts and finishing edges.

What Does ABS Plastic Stand For?

ABS stands for Acrylonitrile Butadiene Styrene, which are the three monomers that make up the polymer. Each component contributes to the properties of the plastic:

  • Acrylonitrile: Provides chemical resistance and hardness.
  • Butadiene: Adds toughness and impact resistance.
  • Styrene: Contributes rigidity and processability.

How to Paint ABS Plastic?

If you want to paint ABS plastic to enhance its appearance and protect its surface, here’s how to achieve the best results:

  1. Clean the Surface: Ensure it is clean and free from dust, grease, or any other contaminants. Use isopropyl alcohol for cleaning.
  2. Sand the Surface: Lightly sand the surface with fine-grit sandpaper (around 400 grit) to create a smooth surface for better paint adhesion.
  3. Prime the Surface: Apply a primer to ensure the paint adheres properly. Allow the primer to dry completely before painting.
  4. Choose the Right Paint:
  • Acrylic Paints: Water-based acrylics are ideal for their ease of use and cleanup.
  • Spray Paint: Specially formulated spray paints for hobby and crafts provide a smooth, even finish.

Apply the Paint: Use a Brush or Spray depending on your choice of paint, and apply it in thin, even coats. If using a brush, use smooth, even strokes. If using spray paint, hold the can about 6-8 inches away from the surface and use sweeping motions to avoid drips. Multiple Coats: Apply multiple thin coats rather than one thick coat. Allow each coat to dry before applying the next. Seal the Paint: For added durability, apply a clear sealant or protective varnish once the paint is completely dry. This protects the paint from chipping and wear.